Get it on Google Play

2015 60HP Triplex 2800BBL/Day Oil Transfer Package

Download Images

60HP Triplex 2800BBL/Day Oil Transfer Package

$145,000.00

Grand Prairie, Alberta

Listing ID 36474
Company Crusader Joint Ventures
Year Built 2015
Condition B

Pump Information

Pump Type Positive Displacement
Horse Power 60
Skidded Yes
Sour Service No
ANSI Rating - Suction 150#
ANSI Rating - Discharge 1500#
VFD Compatible Yes
Design Rate
Voltage Rating 480V / 3 Ph / 60 Hz
Manufacturer Candyne Pumps

Pricing Information

Price

$145,000.00

Serial Numbers

A#
CRN#
Serial#

Location

Operating Area Grand Prairie, Alberta

Description

=====================

EQUIPMENT OVERVIEW

=====================

Let’s move some oil! This Candyne built 1500ANSI rated pump package is sitting in Grande Prairie after a brief 6 month rental where it ran for less than 48 hours, so it’s ready to roll. Originally designed for oil transfer, it features a charge pump to boost off tanks into the triplex pump and includes spools for filtration, making it easily setup for a more conventional injection or disposal application. The building is fully wired to junction boxes and is backed by a 3 month warranty. A 30 page quote and full drawing package is available for the high detail folks out there ;)

360º Virtual Tour:

Explore this package in rich detail through a virtual walkthrough here:

https://www.crusaderjv.com/equipment/60hp-triplex-2800bbl-day-oil-transfer-package-ces1849/#virtual-tour

==================================

MAIN PUMPS, ASSEMBLIES & MOTORS

==================================

P-401 Triplex Pump:

One (1) Reconditioned MK P323 Triplex Pump​:

• c/w 3 Month Warranty​

• 2.5” Plungers Installed (Other Sizes Available)​

• Maximum Continuous RPM Rating: 500RPM​

• 2.5” NPT Suction, 2” NPT Discharge Connections​

• Rated for 63HP Continuous Duty​

• Max 2695psi

• 3 Feed Lubricator w/ Oil Reservoir Daytank​

• Sheave Kit and Aluminum Belt Guard ​

• Mounted on sub assembly skid and attached to main skid

PM-401 Motor:​

• One (1) TECO 60HP Electric Motor

• TEFC; 1180 RPM ​

• VFD Rated​

• 480/3/60VAC​

S-405 Suction Stabilizer: ​

• One (1) CoorsTek Suction Pulsation Stabilizers​

• 300 cu/in​

• 2.5” NPT 150#​

PD-161 Discharge Stabilizer:​

• One (1) NEW CoorsTek Discharge Pulsation Stabilizer​

• 300 cu/in​

• 2” NPT 600# (MAWP 1440PSI)

P-400 Charge Pump: ​

• One (1) ANSI MTX/LTX 1.5 x 3-10 Centrifugal Pump​

• Carbon Steel Internals​

• Rated at 6HP @ 1800RPM​

Pump Performance:

Performance data available upon request for volume and pressure requirements. Performance data also available by downloading the feature sheet in the documents tab.

=============

FILTER VESSEL

=============

F-161 Filter Vessel: ​ (Not Included)

• SPOOL PROVIDED to ACCOMMODATE FUTURE FILTER​. Description at right is proposed filter solution

• Filter Available Currently in Stock

• One (1) NEW 3 Bag P2 Filter

• 4” 150# RF in/out Connections ​

• Rated for 815m3/day​

• AB/BC/SK CRN Registration

M-160 Charge Pump Motor​:

• One (1) 7.5 HP TECO Motor ​

• TEFC, 1800 RPM​

• 460/3/60Hz​

=============================

INSTRUMENTATION & CONTROLS

=============================

PI-100 Pressure Indicator 4” x ½” 0-100psi​

PI-103 Pressure Indicator 4” x ½” 0-100psi​

PI-104 Pressure Indicator 4” x ½” 0-1000psi)​

PSLL-401 Low suction pressure Shutdown Switch Low CCS DualSnap )​

PSH-401 High discharge pressure Shutdown Switch High CCS DualSnap (6900GZE20 SET TBA)​

PSV-400 Pressure Safety Valve Charge Pump Discharge​

PSV-401 Pressure Safety Valve Discharge​

VT-401 High Vibration Transmitter ​

LSL-401 Low Oil Level Shutdown Murphy EX​

LSHH-400 Sump Level Safety Shutdown SOR

=======

PIPING

=======

Suction Piping: 4” 150# :

• Includes 4” Y strainer and Isolation valve​

Discharge Piping: 3” 1500:

• Isolation valve​

• Check valve​

• Drain valves to drain sump

Drain Piping to be 1” and will drain into open drain sump from:

• Basket strainer drain​

• Suction piping between P-400/P-401​

• Discharge piping​

• P-161 stuffing box drain

Piping Notes:

• Discharge stabilizer MAWP 1440PSI

• Built to ASME B31.3 ​

• Discharge piping to be sch. 80​

• Suction piping to be sch. 40​

• 100% X-Ray / No PWHT​

• All pipe/fittings/bolting/gasket materials to be standard ​

• Discharge Stabilizer is rated 600#

================

SKID & BUILDING

================

• 13’ W x 19’ L x 8’ 6” Eave Never Used Skid/Building​

• ¼” Checker Plate Flooring​

• 2” Drip Lip Around Skid​

• Drain Sump w/ 2” 150# Line​

• Gable Style Building​

• Ice Rakes

• Ridge Vent​

• Eavestroughs and Downspouts​

• One (1) Double Man Door​

• One (1) Single Man Door​

• 3” Fire Retardant Spray Foam Under skid Insulation Insulated Skid

===========

ELECTRICAL

===========

• Two (2) Interior Lights w/ Switch​

• Two (2) Exterior Lights w/ Switch​

• One (1) High Mount Exhaust Fan​

• One (1) 10KW Electric Heater​

• One (1) 12V Electrical Receptacle​

• Two (2) ESD Buttons​

• Wired to Junction Boxes

=======================

QC/QA DOCUMENTATION

=======================

• Operation, Parts, Service and QA Manual provided with package c/w:​

• P&ID Dwg’s​

• Pump Curves​

• Installation and Operation manual​

• Parts and service Manual for all equipment​

• Data sheets for all equipment in package​

• QC Manual from approved shop with AQP​

• AB-83​

• U1A for Filter vessel and Pulsation stabilizers​

• P&ID

==========

DRAWINGS

==========

Drawings are available by downloading a PDF file in the documents tab.

======================

VERIFIED BY CRUSADER

======================

Lower your surplus decision risk with increased optics on equipment that has been verified by the experienced Crusader Joint Venture team – it’s a purchase to feel great about.

• On-site documentation by technical experts

• Exceptional detail of pertinent technical information

• Digital cataloging & professional marketing

• Comprehensive photographic cataloguing

• Available 3D/360º virtual scans showing unparalleled detail

View all of our surplus inventory at www.crusaderjv.com/surplus

Contact Information

Crusader jv logo red

Kameron Anderson
Crusader Joint Ventures


#400 909 - 17 AVE SW
Calgary, Alberta
T2T 0A4

403-819-3906
kameron@crusaderjv.com