Get it on Google Play

2013 200 HP Sour Dual Pump Injection Package (w/ 800 Amp MCC)

Download Images

200 HP Sour Dual Pump Injection Package (w/ 800 Amp MCC)


Halkirk, Alberta

Listing ID 36426
Company Crusader Joint Ventures
Year Built 2013
Condition B

Pump Information

Pump Type Positive Displacement
Horse Power 200
Skidded Yes
Sour Service Yes
ANSI Rating - Suction 150#
ANSI Rating - Discharge 1500#
VFD Compatible Yes
Design Rate
Voltage Rating 480V / 3 Ph / 60 Hz
Manufacturer Weatherford

Pricing Information



Serial Numbers



Operating Area Halkirk, Alberta






A truly fully loaded pump package and MCC building; this unit ran for just under a year (Red Earth) before the formation failed and it was moved off site. Designed for 1500# and full sour operation, the W130M Triplex pumps have full duplex stainless fluid ends and all piping and valves are internally coated. On the discharge side, a lot of the control valves, transmitters etc. were removed when it arrived, however all missing parts have now been replaced with new. On the suction side, the filters and charge pumps were removed, which is good because now there is a dance floor size spot where we can outfit the suction end exactly how you require. A generous electrical wiring package is also included with everything wired to JB’s and the “as new” MCC building.

360º Virtual Tour:

Explore this package in rich detail through a virtual walkthrough at:




Triplex Pumps:​

• Two (2) Weatherford W130M ​Triplex Pumps

• Duplex Stainless Fluid Ends

• Client choice of plungers

• Maximum Continuous RPM Rating: 450RPM​

• 3” RJ Suction, 1.5” FF Discharge Connections

• Rated for 130HP Continuous Duty​

• Sheave Kit and V-Belt Drive

• Aluminum Belt Guards

• 3 Feed Lubricators w/ 55 Gal Oil Reservoir

• Suction & Discharge 600cu In Stabilizers

• Mounted on sub-assemblies and attached to main skid

Pump Notes:

• Pumps are in excellent condition as verified by our own internal inspection and our commitment to a 12 month warranty. The internal inspection is available for review by interested parties.

• The package ran for just under one year prior to shutdown

Pump Performance:

Performance data available upon request for volume and pressure requirements. Performance data also available by downloading the feature sheet in the documents tab.

Triplex Pump Motors:

• Two (2) TECO Westinghouse 100 HP Electric Motors ​

• TEFC; 1200RPM ​

• VFD Rated​, Constant torque

• 480/3/60VAC​




​​PI-1110/1210 Discharge pressure Indicator (0-3000 PSI)

PIT-1100/1200 Rosemount 3051 Discharge Transmitters

FQIT/FE-1000 1 ½ x 2 EZ-IN (2” 1500# RF) Turbine Flow Meter w/ MC-III Analyzer

​​VSH-1100/1200 High Vibration Switch

​LSL-1100/1200 Murphy EX Low Oil Level Shutdown

LSH Sealed Sump Level Switch

PDIT Rosemount 3051 Filter Differential Transmitter

Suction Instrumentation will be selected once customer decides configuration of filters/charge pump etc. or it can be taken to site and completed there.




Suction Piping: ​

• 6” 150# Suction Inlet

• Remainder for Suction Piping 3″ & 6″ to Each Pump

• 3″ Spools for Stabilizer Mounting

• Internally Coated

Drain Piping:

• All process piping drains go to sealed sump via threaded drain piping

• Filter drain piping currently in place (absent of filters)

• Pump stuffing boxes drain into open Sump

Discharge Piping:

• Each individual discharge line exits the plunger pump into a 2” 1500 ANSI rated line. The discharge stabilizers are located directly after the plunger pump discharge.

• The PSV and automated startup bypass valve are located before the discharge header. There will also be a block and check valve prior to connecting to the discharge header from each pump individual discharge line, to prevent back flow possibilities.

• After the two discharge lines connect, there is the meter run with an uninterrupted 10 x upstream / 5 x downstream flow criteria.

• After the meter run, the flow flows through a 3” check and a ball valve, before leaving to skid edge.

• PSV and start-up bypass piping go back to main pump suction​

• Drain valves to drain sump​

• Internally Coated

• All supports are mounted on structural skid members

• All supports are secured by clamp style tie-downs

• Floating Full Port Block Valves on the system to ensure an adequate flow rating of the line/system.





• 17’ W x 39’ L Skid and Building​

• ¼” Checker Plate Flooring​

• 2” Drip Lip Around Skid​

• Two (2) Open Sumps /

• One (1) Sealed Sump w/ 2″ Vented Outside

• Sump​: High Level Sump Switch


• Gable Style Building​

• Ice Rakes​

• Four (4) 12” x 18” Louvers w/ closers

• One (1) Double Man Door​

• One (1) Single Man Door​

• 3” Fire Retardant Spray Foam Under skid Insulation Insulated Skid




• Six (6) Interior Lights w/ Switch​es

• Two (2) Exterior Lights w/ Switches​

• One (1) High Mount Exhaust Fan​ w/ switch

• One (1) Low Mount Exhaust Fan w/ switch

• LEL and H2S Gas Detection

• One (1) 120V Electrical Receptacle​

• Two (2) ESD Buttons​

• Two (2) Hazlok XP heaters w/ thermostats

• All electrical has been tested and replaced as required. New junction boxes have been installed.

End Devices Connected to JBs:

• Two (2) pressure transmitters (PIT-1100/1200) – Suction

• One (1) differential pressure transmitter (DPIT-1000) – Suction

• Two (2) pressure transmitters (PIT-1110/1210) – Discharge

• Two (2) vibration switch (VSH-1100/1200)

• Two (2) oil level switch low (LSLL-1100/1200)

• One (1) flow meter 4-20 connection (FE/FT-1000)

• One (1) sump level switch (LSH-1300)

• Included: Rigid aluminum conduit and steel unistrut used throughout

• Lamicoids for all switches, junction box’s, and ESD’s

Top entry into junction boxes for all conduits




Lower your surplus decision risk with increased optics on equipment that has been verified by the experienced Crusader Joint Venture team – it’s a purchase to feel great about.

• On-site documentation by technical experts

• Exceptional detail of pertinent technical information

• Digital cataloging & professional marketing

• Comprehensive photographic cataloguing

• Available 3D/360º virtual scans showing unparalleled detail

View all of our surplus inventory at

Contact Information

Crusader jv logo red

Kameron Anderson
Crusader Joint Ventures

#400 909 - 17 AVE SW
Calgary, Alberta
T2T 0A4